Battery Organizer (AA/AAA) Tons of Colors! Two Sizes!
from $13.00
For sale is a made-to-order battery storage box/dispenser that holds AA and AAA batteries.
It comes in two sizes: Regular and Large
Both of our sizes are larger than our competitors' sizes.
Regular holds about 23 AA and 38 AAA Batteries.
Large Holds around 40 AA and around 60 AAA (depending on the brand of battery, some are slightly different sizes).
We recommend the Large version if you get your batteries at Costco.
We are always improving on our designs, and this model represents input we have gotten from buyers. It is generally larger than the other similar models you see, make sure to check measurements to make sure you're getting your money's worth!
We appreciate feedback and letting us know how we can better improve our products.
This model is improved over our previous models in the following ways:
New features include:
-a reinforced shell with larger inside dimensions
-reinforced drill points for those wishing to mount it
-better font design
-the addition of a louver in the AA port to further reduce jamming potential caused by mix-and-matched AA sizes
-a stronger infill pattern
-a longer back plate
-new, more rugged front dispenser shaft
-holds about 10% more batteries than similar sized models
-uses about 6% less material despite being stronger structurally ( small model weighs only 143g; 5.04Oz)
Get it in most any color, we add new colors often, so just ask if you don’t see one you want!
Introducing Mix-And-Match!
- We will use a variety of colors and let you pick from several color choices. We use this method to prevent wasting filament that would not make a whole product by itself.
- This makes for a one of a kind piece, and also helps us reduce recycling costs, so we pass the savings right to you by keeping all of your prices lower.
Strong PLA Premium plastic makes sure it can handle all your batteries without breaking. Batteries not included.
We are constantly improving on our designs based on feedback from our customers, so your handmade product may vary slightly from the photos, as each of our prints is an improvement over the previous one.
Our PLA is a plant-based plastic material that is a fully biodegradable thermoplastic polymer consisting of renewable raw materials. We use only the finest brands available, and mainly source it locally when possible.
As always, we are happy to send you a picture of your finished/in progress order.
All orders follow a stringent sanitation process, using UVC light and Microban brand disinfectant before being immediately packaged for shipping.
This holder was designed in house by pittsburgh3dprints.com
It comes in two sizes: Regular and Large
Both of our sizes are larger than our competitors' sizes.
Regular holds about 23 AA and 38 AAA Batteries.
Large Holds around 40 AA and around 60 AAA (depending on the brand of battery, some are slightly different sizes).
We recommend the Large version if you get your batteries at Costco.
We are always improving on our designs, and this model represents input we have gotten from buyers. It is generally larger than the other similar models you see, make sure to check measurements to make sure you're getting your money's worth!
We appreciate feedback and letting us know how we can better improve our products.
This model is improved over our previous models in the following ways:
New features include:
-a reinforced shell with larger inside dimensions
-reinforced drill points for those wishing to mount it
-better font design
-the addition of a louver in the AA port to further reduce jamming potential caused by mix-and-matched AA sizes
-a stronger infill pattern
-a longer back plate
-new, more rugged front dispenser shaft
-holds about 10% more batteries than similar sized models
-uses about 6% less material despite being stronger structurally ( small model weighs only 143g; 5.04Oz)
Get it in most any color, we add new colors often, so just ask if you don’t see one you want!
Introducing Mix-And-Match!
- We will use a variety of colors and let you pick from several color choices. We use this method to prevent wasting filament that would not make a whole product by itself.
- This makes for a one of a kind piece, and also helps us reduce recycling costs, so we pass the savings right to you by keeping all of your prices lower.
Strong PLA Premium plastic makes sure it can handle all your batteries without breaking. Batteries not included.
We are constantly improving on our designs based on feedback from our customers, so your handmade product may vary slightly from the photos, as each of our prints is an improvement over the previous one.
Our PLA is a plant-based plastic material that is a fully biodegradable thermoplastic polymer consisting of renewable raw materials. We use only the finest brands available, and mainly source it locally when possible.
As always, we are happy to send you a picture of your finished/in progress order.
All orders follow a stringent sanitation process, using UVC light and Microban brand disinfectant before being immediately packaged for shipping.
This holder was designed in house by pittsburgh3dprints.com
Primary color:
Dimensions:
Quantity:
For sale is a made-to-order battery storage box/dispenser that holds AA and AAA batteries.
It comes in two sizes: Regular and Large
Both of our sizes are larger than our competitors' sizes.
Regular holds about 23 AA and 38 AAA Batteries.
Large Holds around 40 AA and around 60 AAA (depending on the brand of battery, some are slightly different sizes).
We recommend the Large version if you get your batteries at Costco.
We are always improving on our designs, and this model represents input we have gotten from buyers. It is generally larger than the other similar models you see, make sure to check measurements to make sure you're getting your money's worth!
We appreciate feedback and letting us know how we can better improve our products.
This model is improved over our previous models in the following ways:
New features include:
-a reinforced shell with larger inside dimensions
-reinforced drill points for those wishing to mount it
-better font design
-the addition of a louver in the AA port to further reduce jamming potential caused by mix-and-matched AA sizes
-a stronger infill pattern
-a longer back plate
-new, more rugged front dispenser shaft
-holds about 10% more batteries than similar sized models
-uses about 6% less material despite being stronger structurally ( small model weighs only 143g; 5.04Oz)
Get it in most any color, we add new colors often, so just ask if you don’t see one you want!
Introducing Mix-And-Match!
- We will use a variety of colors and let you pick from several color choices. We use this method to prevent wasting filament that would not make a whole product by itself.
- This makes for a one of a kind piece, and also helps us reduce recycling costs, so we pass the savings right to you by keeping all of your prices lower.
Strong PLA Premium plastic makes sure it can handle all your batteries without breaking. Batteries not included.
We are constantly improving on our designs based on feedback from our customers, so your handmade product may vary slightly from the photos, as each of our prints is an improvement over the previous one.
Our PLA is a plant-based plastic material that is a fully biodegradable thermoplastic polymer consisting of renewable raw materials. We use only the finest brands available, and mainly source it locally when possible.
As always, we are happy to send you a picture of your finished/in progress order.
All orders follow a stringent sanitation process, using UVC light and Microban brand disinfectant before being immediately packaged for shipping.
This holder was designed in house by pittsburgh3dprints.com
It comes in two sizes: Regular and Large
Both of our sizes are larger than our competitors' sizes.
Regular holds about 23 AA and 38 AAA Batteries.
Large Holds around 40 AA and around 60 AAA (depending on the brand of battery, some are slightly different sizes).
We recommend the Large version if you get your batteries at Costco.
We are always improving on our designs, and this model represents input we have gotten from buyers. It is generally larger than the other similar models you see, make sure to check measurements to make sure you're getting your money's worth!
We appreciate feedback and letting us know how we can better improve our products.
This model is improved over our previous models in the following ways:
New features include:
-a reinforced shell with larger inside dimensions
-reinforced drill points for those wishing to mount it
-better font design
-the addition of a louver in the AA port to further reduce jamming potential caused by mix-and-matched AA sizes
-a stronger infill pattern
-a longer back plate
-new, more rugged front dispenser shaft
-holds about 10% more batteries than similar sized models
-uses about 6% less material despite being stronger structurally ( small model weighs only 143g; 5.04Oz)
Get it in most any color, we add new colors often, so just ask if you don’t see one you want!
Introducing Mix-And-Match!
- We will use a variety of colors and let you pick from several color choices. We use this method to prevent wasting filament that would not make a whole product by itself.
- This makes for a one of a kind piece, and also helps us reduce recycling costs, so we pass the savings right to you by keeping all of your prices lower.
Strong PLA Premium plastic makes sure it can handle all your batteries without breaking. Batteries not included.
We are constantly improving on our designs based on feedback from our customers, so your handmade product may vary slightly from the photos, as each of our prints is an improvement over the previous one.
Our PLA is a plant-based plastic material that is a fully biodegradable thermoplastic polymer consisting of renewable raw materials. We use only the finest brands available, and mainly source it locally when possible.
As always, we are happy to send you a picture of your finished/in progress order.
All orders follow a stringent sanitation process, using UVC light and Microban brand disinfectant before being immediately packaged for shipping.
This holder was designed in house by pittsburgh3dprints.com
For sale is a made-to-order battery storage box/dispenser that holds AA and AAA batteries.
It comes in two sizes: Regular and Large
Both of our sizes are larger than our competitors' sizes.
Regular holds about 23 AA and 38 AAA Batteries.
Large Holds around 40 AA and around 60 AAA (depending on the brand of battery, some are slightly different sizes).
We recommend the Large version if you get your batteries at Costco.
We are always improving on our designs, and this model represents input we have gotten from buyers. It is generally larger than the other similar models you see, make sure to check measurements to make sure you're getting your money's worth!
We appreciate feedback and letting us know how we can better improve our products.
This model is improved over our previous models in the following ways:
New features include:
-a reinforced shell with larger inside dimensions
-reinforced drill points for those wishing to mount it
-better font design
-the addition of a louver in the AA port to further reduce jamming potential caused by mix-and-matched AA sizes
-a stronger infill pattern
-a longer back plate
-new, more rugged front dispenser shaft
-holds about 10% more batteries than similar sized models
-uses about 6% less material despite being stronger structurally ( small model weighs only 143g; 5.04Oz)
Get it in most any color, we add new colors often, so just ask if you don’t see one you want!
Introducing Mix-And-Match!
- We will use a variety of colors and let you pick from several color choices. We use this method to prevent wasting filament that would not make a whole product by itself.
- This makes for a one of a kind piece, and also helps us reduce recycling costs, so we pass the savings right to you by keeping all of your prices lower.
Strong PLA Premium plastic makes sure it can handle all your batteries without breaking. Batteries not included.
We are constantly improving on our designs based on feedback from our customers, so your handmade product may vary slightly from the photos, as each of our prints is an improvement over the previous one.
Our PLA is a plant-based plastic material that is a fully biodegradable thermoplastic polymer consisting of renewable raw materials. We use only the finest brands available, and mainly source it locally when possible.
As always, we are happy to send you a picture of your finished/in progress order.
All orders follow a stringent sanitation process, using UVC light and Microban brand disinfectant before being immediately packaged for shipping.
This holder was designed in house by pittsburgh3dprints.com
It comes in two sizes: Regular and Large
Both of our sizes are larger than our competitors' sizes.
Regular holds about 23 AA and 38 AAA Batteries.
Large Holds around 40 AA and around 60 AAA (depending on the brand of battery, some are slightly different sizes).
We recommend the Large version if you get your batteries at Costco.
We are always improving on our designs, and this model represents input we have gotten from buyers. It is generally larger than the other similar models you see, make sure to check measurements to make sure you're getting your money's worth!
We appreciate feedback and letting us know how we can better improve our products.
This model is improved over our previous models in the following ways:
New features include:
-a reinforced shell with larger inside dimensions
-reinforced drill points for those wishing to mount it
-better font design
-the addition of a louver in the AA port to further reduce jamming potential caused by mix-and-matched AA sizes
-a stronger infill pattern
-a longer back plate
-new, more rugged front dispenser shaft
-holds about 10% more batteries than similar sized models
-uses about 6% less material despite being stronger structurally ( small model weighs only 143g; 5.04Oz)
Get it in most any color, we add new colors often, so just ask if you don’t see one you want!
Introducing Mix-And-Match!
- We will use a variety of colors and let you pick from several color choices. We use this method to prevent wasting filament that would not make a whole product by itself.
- This makes for a one of a kind piece, and also helps us reduce recycling costs, so we pass the savings right to you by keeping all of your prices lower.
Strong PLA Premium plastic makes sure it can handle all your batteries without breaking. Batteries not included.
We are constantly improving on our designs based on feedback from our customers, so your handmade product may vary slightly from the photos, as each of our prints is an improvement over the previous one.
Our PLA is a plant-based plastic material that is a fully biodegradable thermoplastic polymer consisting of renewable raw materials. We use only the finest brands available, and mainly source it locally when possible.
As always, we are happy to send you a picture of your finished/in progress order.
All orders follow a stringent sanitation process, using UVC light and Microban brand disinfectant before being immediately packaged for shipping.
This holder was designed in house by pittsburgh3dprints.com