Heavy Mixer Knob Replacement [3 Pack] - Custom matching available.
$10.00
Heavy Mixer Replacement Knob (3 Pack)
Easily pops on to the mixer switches and is designed to work with old and new mixers and even some older appliances as well.
This is a replica of the Speed Control knob, and can also replace the Tilt Control Knob for many mixers in many age ranges. The mixers have changed slightly in design over the years, so this might not be a factory match, but it will fit snugly and function much better than the bare metal switch. Your fingers will thank you! We also know that older mixers tend to have bigger differences in switch sizes, so we can work with you on matching your size if you can provide a picture of where the knob will be going.
Comes with 3 knobs in the same color, if you'd like them to be separate colors, please let us know. We are happy to add in some slightly larger or slightly smaller knobs if you're not sure what size you need.
*We often get requests for specific mixer types, and are happy to make knobs to fit for no extra charge*. If we aren't sure, you'll like our "mixed" approach, where we can send you sets of 2 knobs in 3 slightly different sizes, for a total of six knobs.
Want to see close up versions of our colors? Check out pittsburgh3dprints.com/colors
If you're not 100% satisfied with your purchase, we do offer a full warranty on this item.
We are constantly improving on our designs based on feedback from our customers, so your handmade product may vary slightly from the photos, as each of our prints is an improvement over the previous one.
Our PLA is a plant-based plastic material that is a fully biodegradable thermoplastic polymer consisting of renewable raw materials. We use only the finest brands available, and mainly source it locally when possible.
As always, we are happy to send you a picture of your finished/in progress order.
All orders follow a stringent sanitation process, using UVC light and Microban brand disinfectant before being immediately packaged for shipping.
Easily pops on to the mixer switches and is designed to work with old and new mixers and even some older appliances as well.
This is a replica of the Speed Control knob, and can also replace the Tilt Control Knob for many mixers in many age ranges. The mixers have changed slightly in design over the years, so this might not be a factory match, but it will fit snugly and function much better than the bare metal switch. Your fingers will thank you! We also know that older mixers tend to have bigger differences in switch sizes, so we can work with you on matching your size if you can provide a picture of where the knob will be going.
Comes with 3 knobs in the same color, if you'd like them to be separate colors, please let us know. We are happy to add in some slightly larger or slightly smaller knobs if you're not sure what size you need.
*We often get requests for specific mixer types, and are happy to make knobs to fit for no extra charge*. If we aren't sure, you'll like our "mixed" approach, where we can send you sets of 2 knobs in 3 slightly different sizes, for a total of six knobs.
Want to see close up versions of our colors? Check out pittsburgh3dprints.com/colors
If you're not 100% satisfied with your purchase, we do offer a full warranty on this item.
We are constantly improving on our designs based on feedback from our customers, so your handmade product may vary slightly from the photos, as each of our prints is an improvement over the previous one.
Our PLA is a plant-based plastic material that is a fully biodegradable thermoplastic polymer consisting of renewable raw materials. We use only the finest brands available, and mainly source it locally when possible.
As always, we are happy to send you a picture of your finished/in progress order.
All orders follow a stringent sanitation process, using UVC light and Microban brand disinfectant before being immediately packaged for shipping.
Primary color:
Quantity:
Heavy Mixer Replacement Knob (3 Pack)
Easily pops on to the mixer switches and is designed to work with old and new mixers and even some older appliances as well.
This is a replica of the Speed Control knob, and can also replace the Tilt Control Knob for many mixers in many age ranges. The mixers have changed slightly in design over the years, so this might not be a factory match, but it will fit snugly and function much better than the bare metal switch. Your fingers will thank you! We also know that older mixers tend to have bigger differences in switch sizes, so we can work with you on matching your size if you can provide a picture of where the knob will be going.
Comes with 3 knobs in the same color, if you'd like them to be separate colors, please let us know. We are happy to add in some slightly larger or slightly smaller knobs if you're not sure what size you need.
*We often get requests for specific mixer types, and are happy to make knobs to fit for no extra charge*. If we aren't sure, you'll like our "mixed" approach, where we can send you sets of 2 knobs in 3 slightly different sizes, for a total of six knobs.
Want to see close up versions of our colors? Check out pittsburgh3dprints.com/colors
If you're not 100% satisfied with your purchase, we do offer a full warranty on this item.
We are constantly improving on our designs based on feedback from our customers, so your handmade product may vary slightly from the photos, as each of our prints is an improvement over the previous one.
Our PLA is a plant-based plastic material that is a fully biodegradable thermoplastic polymer consisting of renewable raw materials. We use only the finest brands available, and mainly source it locally when possible.
As always, we are happy to send you a picture of your finished/in progress order.
All orders follow a stringent sanitation process, using UVC light and Microban brand disinfectant before being immediately packaged for shipping.
Easily pops on to the mixer switches and is designed to work with old and new mixers and even some older appliances as well.
This is a replica of the Speed Control knob, and can also replace the Tilt Control Knob for many mixers in many age ranges. The mixers have changed slightly in design over the years, so this might not be a factory match, but it will fit snugly and function much better than the bare metal switch. Your fingers will thank you! We also know that older mixers tend to have bigger differences in switch sizes, so we can work with you on matching your size if you can provide a picture of where the knob will be going.
Comes with 3 knobs in the same color, if you'd like them to be separate colors, please let us know. We are happy to add in some slightly larger or slightly smaller knobs if you're not sure what size you need.
*We often get requests for specific mixer types, and are happy to make knobs to fit for no extra charge*. If we aren't sure, you'll like our "mixed" approach, where we can send you sets of 2 knobs in 3 slightly different sizes, for a total of six knobs.
Want to see close up versions of our colors? Check out pittsburgh3dprints.com/colors
If you're not 100% satisfied with your purchase, we do offer a full warranty on this item.
We are constantly improving on our designs based on feedback from our customers, so your handmade product may vary slightly from the photos, as each of our prints is an improvement over the previous one.
Our PLA is a plant-based plastic material that is a fully biodegradable thermoplastic polymer consisting of renewable raw materials. We use only the finest brands available, and mainly source it locally when possible.
As always, we are happy to send you a picture of your finished/in progress order.
All orders follow a stringent sanitation process, using UVC light and Microban brand disinfectant before being immediately packaged for shipping.
Heavy Mixer Replacement Knob (3 Pack)
Easily pops on to the mixer switches and is designed to work with old and new mixers and even some older appliances as well.
This is a replica of the Speed Control knob, and can also replace the Tilt Control Knob for many mixers in many age ranges. The mixers have changed slightly in design over the years, so this might not be a factory match, but it will fit snugly and function much better than the bare metal switch. Your fingers will thank you! We also know that older mixers tend to have bigger differences in switch sizes, so we can work with you on matching your size if you can provide a picture of where the knob will be going.
Comes with 3 knobs in the same color, if you'd like them to be separate colors, please let us know. We are happy to add in some slightly larger or slightly smaller knobs if you're not sure what size you need.
*We often get requests for specific mixer types, and are happy to make knobs to fit for no extra charge*. If we aren't sure, you'll like our "mixed" approach, where we can send you sets of 2 knobs in 3 slightly different sizes, for a total of six knobs.
Want to see close up versions of our colors? Check out pittsburgh3dprints.com/colors
If you're not 100% satisfied with your purchase, we do offer a full warranty on this item.
We are constantly improving on our designs based on feedback from our customers, so your handmade product may vary slightly from the photos, as each of our prints is an improvement over the previous one.
Our PLA is a plant-based plastic material that is a fully biodegradable thermoplastic polymer consisting of renewable raw materials. We use only the finest brands available, and mainly source it locally when possible.
As always, we are happy to send you a picture of your finished/in progress order.
All orders follow a stringent sanitation process, using UVC light and Microban brand disinfectant before being immediately packaged for shipping.
Easily pops on to the mixer switches and is designed to work with old and new mixers and even some older appliances as well.
This is a replica of the Speed Control knob, and can also replace the Tilt Control Knob for many mixers in many age ranges. The mixers have changed slightly in design over the years, so this might not be a factory match, but it will fit snugly and function much better than the bare metal switch. Your fingers will thank you! We also know that older mixers tend to have bigger differences in switch sizes, so we can work with you on matching your size if you can provide a picture of where the knob will be going.
Comes with 3 knobs in the same color, if you'd like them to be separate colors, please let us know. We are happy to add in some slightly larger or slightly smaller knobs if you're not sure what size you need.
*We often get requests for specific mixer types, and are happy to make knobs to fit for no extra charge*. If we aren't sure, you'll like our "mixed" approach, where we can send you sets of 2 knobs in 3 slightly different sizes, for a total of six knobs.
Want to see close up versions of our colors? Check out pittsburgh3dprints.com/colors
If you're not 100% satisfied with your purchase, we do offer a full warranty on this item.
We are constantly improving on our designs based on feedback from our customers, so your handmade product may vary slightly from the photos, as each of our prints is an improvement over the previous one.
Our PLA is a plant-based plastic material that is a fully biodegradable thermoplastic polymer consisting of renewable raw materials. We use only the finest brands available, and mainly source it locally when possible.
As always, we are happy to send you a picture of your finished/in progress order.
All orders follow a stringent sanitation process, using UVC light and Microban brand disinfectant before being immediately packaged for shipping.