Rim Salter Bar Accessory
$20.00
This handy gadget helps apply salt/sugar to the rim of a margarita glass, and fits most glasses universally.
The lid holds juices and mixing materials, and the bottom hold the salt/sugar. Please note this is intended for stationary use (such as on a bar top), as it is not sealed watertight when closed.
Rinse in cold water after use. Not dishwasher recommended. If you have very large glasses, please send us measurements and we can expand this for you at no charge.
We are constantly improving on our designs based on feedback from our customers, so your handmade product may vary slightly from the photos, as each of our prints is an improvement over the previous one.
Our PLA is a plant-based plastic material that is a fully biodegradable thermoplastic polymer consisting of renewable raw materials. We use only the finest brands available, and mainly source it locally when possible.
As always, we are happy to send you a picture of your finished/in progress order.
All orders follow a stringent sanitation process, using UVC light and Microban brand disinfectant before being immediately packaged for shipping.
Based on a design by ipsally https://www.thingiverse.com/thing:3058983
We reserve the right to edit this design for better fitment, as part of our continuous improvement process.
The lid holds juices and mixing materials, and the bottom hold the salt/sugar. Please note this is intended for stationary use (such as on a bar top), as it is not sealed watertight when closed.
Rinse in cold water after use. Not dishwasher recommended. If you have very large glasses, please send us measurements and we can expand this for you at no charge.
We are constantly improving on our designs based on feedback from our customers, so your handmade product may vary slightly from the photos, as each of our prints is an improvement over the previous one.
Our PLA is a plant-based plastic material that is a fully biodegradable thermoplastic polymer consisting of renewable raw materials. We use only the finest brands available, and mainly source it locally when possible.
As always, we are happy to send you a picture of your finished/in progress order.
All orders follow a stringent sanitation process, using UVC light and Microban brand disinfectant before being immediately packaged for shipping.
Based on a design by ipsally https://www.thingiverse.com/thing:3058983
We reserve the right to edit this design for better fitment, as part of our continuous improvement process.
Primary color:
Quantity:
This handy gadget helps apply salt/sugar to the rim of a margarita glass, and fits most glasses universally.
The lid holds juices and mixing materials, and the bottom hold the salt/sugar. Please note this is intended for stationary use (such as on a bar top), as it is not sealed watertight when closed.
Rinse in cold water after use. Not dishwasher recommended. If you have very large glasses, please send us measurements and we can expand this for you at no charge.
We are constantly improving on our designs based on feedback from our customers, so your handmade product may vary slightly from the photos, as each of our prints is an improvement over the previous one.
Our PLA is a plant-based plastic material that is a fully biodegradable thermoplastic polymer consisting of renewable raw materials. We use only the finest brands available, and mainly source it locally when possible.
As always, we are happy to send you a picture of your finished/in progress order.
All orders follow a stringent sanitation process, using UVC light and Microban brand disinfectant before being immediately packaged for shipping.
Based on a design by ipsally https://www.thingiverse.com/thing:3058983
We reserve the right to edit this design for better fitment, as part of our continuous improvement process.
The lid holds juices and mixing materials, and the bottom hold the salt/sugar. Please note this is intended for stationary use (such as on a bar top), as it is not sealed watertight when closed.
Rinse in cold water after use. Not dishwasher recommended. If you have very large glasses, please send us measurements and we can expand this for you at no charge.
We are constantly improving on our designs based on feedback from our customers, so your handmade product may vary slightly from the photos, as each of our prints is an improvement over the previous one.
Our PLA is a plant-based plastic material that is a fully biodegradable thermoplastic polymer consisting of renewable raw materials. We use only the finest brands available, and mainly source it locally when possible.
As always, we are happy to send you a picture of your finished/in progress order.
All orders follow a stringent sanitation process, using UVC light and Microban brand disinfectant before being immediately packaged for shipping.
Based on a design by ipsally https://www.thingiverse.com/thing:3058983
We reserve the right to edit this design for better fitment, as part of our continuous improvement process.
This handy gadget helps apply salt/sugar to the rim of a margarita glass, and fits most glasses universally.
The lid holds juices and mixing materials, and the bottom hold the salt/sugar. Please note this is intended for stationary use (such as on a bar top), as it is not sealed watertight when closed.
Rinse in cold water after use. Not dishwasher recommended. If you have very large glasses, please send us measurements and we can expand this for you at no charge.
We are constantly improving on our designs based on feedback from our customers, so your handmade product may vary slightly from the photos, as each of our prints is an improvement over the previous one.
Our PLA is a plant-based plastic material that is a fully biodegradable thermoplastic polymer consisting of renewable raw materials. We use only the finest brands available, and mainly source it locally when possible.
As always, we are happy to send you a picture of your finished/in progress order.
All orders follow a stringent sanitation process, using UVC light and Microban brand disinfectant before being immediately packaged for shipping.
Based on a design by ipsally https://www.thingiverse.com/thing:3058983
We reserve the right to edit this design for better fitment, as part of our continuous improvement process.
The lid holds juices and mixing materials, and the bottom hold the salt/sugar. Please note this is intended for stationary use (such as on a bar top), as it is not sealed watertight when closed.
Rinse in cold water after use. Not dishwasher recommended. If you have very large glasses, please send us measurements and we can expand this for you at no charge.
We are constantly improving on our designs based on feedback from our customers, so your handmade product may vary slightly from the photos, as each of our prints is an improvement over the previous one.
Our PLA is a plant-based plastic material that is a fully biodegradable thermoplastic polymer consisting of renewable raw materials. We use only the finest brands available, and mainly source it locally when possible.
As always, we are happy to send you a picture of your finished/in progress order.
All orders follow a stringent sanitation process, using UVC light and Microban brand disinfectant before being immediately packaged for shipping.
Based on a design by ipsally https://www.thingiverse.com/thing:3058983
We reserve the right to edit this design for better fitment, as part of our continuous improvement process.